FELDER® – SilentPOWER® – Diamond Saw blade

FELDER® – SilentPOWER® – Diamond Saw blade


Diamond tipped universal saw blade for nearly all wood based materials Maximum tool life due to the high quality diamond coating Optimal cutting results due to the innovative tooth form Average noise emission reduction (when not cutting) of 8-10 dB… … compared with conventional saw blades Recommended handling of the SilentPOWER® Diamond Saw blade Read through the accompanying safety and operating instructions Check the SilentPOWER® Diamond saw blade for damage Use a suitable 2.0 mm riving knife Recommended rotation speed: 4,800 – 6,000 rpm. Recommended wood moisture of the material being processed: 6-10% Recommended saw blade projection: 10 mm above the workpiece When working with the crosscut fence, the rip fence must be moved behind the saw blade or removed Incorrect handling of the SilentPOWER® Diamond Saw blade If during the cut the workpiece is guided along both the crosscut and parallel fences… …then the SilentPOWER® Diamond saw blade could jam or become damaged. The cutting result will be well below standard and may have burn marks. If the saw blade projection has been set too high… … this could result in tears on the underside of the material. Care and maintenance of the SilentPOWER® Diamond Saw blade If there is resin or dirt on the blade, then the SilentPOWER® Diamond Saw blade must be removed and cleaned. Ideal cleaning materials are the FELDER resin remover (Harzlöser) and FELDER Metal shine (Metallglanz). The resin can be removed using the FELDER resin remover and a brush… …and finally the saw blade can be oiled with the FELDER metal shine. Visit our website: www.felder-tooling.com

6 Replies to “FELDER® – SilentPOWER® – Diamond Saw blade”

  1. подскажите а на пилу Festool есть подобного рода диск, и срока он будет стоить? спасибо.

Leave a Reply

Your email address will not be published. Required fields are marked *