How to draw a soccer field in AutoCAD (URPN220 Assignment 2)

How to draw a soccer field in AutoCAD (URPN220 Assignment 2)



hello everyone today I'll show you how to draw assignment to the soccer field let's look at the demonstration PDF first in this assignment you are required to do a soccer field of given dimensions on this page all the dimensions are given in the proper color and your drawing should be exactly as seen as a given dimension so basically you will first change the drawing units to meters and then finish all the drawing I left plot your drawing to PDF files and submit both the AutoCAD file and a PDF file let's look at the diagrams of the standard soccer field you are going to draw the outline of the soccer field is a rectangle the horizontal line is called the touch line and the word color is called the goal line on both the left side and right side of the soccer field there is a goal goal box and a penalty area we also have a penalty mark here I'll be careful that we also have four corner areas represented by four acts on the other side of the soccer field or how-to training and coaching area here the strategy to draw the soccer field is to use the mirror command for my studio of your first draw the outline of the soccer field and I'll go draw the center line and the cinder circle after I finish this part I will draw all the left part here and including learn corner cooking area and then either use a mirror cloud to mirror all what I drew to the right part so in this turn I will see some time in this drawing to finish each geometry they are always multiple with for example to draw all the box where is my mouse to draw all the box you can use line command to draw continuously also you can use offset command to offset the touch line go line and then trim them off so math is not the only way to do all the soccer field you can feel free to explore other possibilities ok let's start drawing other hand this file the assignment to file you can download it from the eCampus so start your drawing in this file let's say I will check my status look at the status bar at the bottom of your window firstly variation make sure that the polar tracking is turned on there is a small triangle on the right side of the political symbol click on the small triangle to exchange the polar tracking settings so make sure that you check the first option by checking the first option your mouse your cursor can be conveniently moved to the vertical and horizontal direction the second thing is to turn on the both nap I click the small triangle to exchange the Osnap setting in this assignment at least you should check the endpoint midpoint center node and perpendicular and these are all we need another thing I want to remind you is that it is better to turn off this awesome mode because if you turn on also note your mouse will be restricted to move to vertical and horizontal direction it is not very convenient to do so so what I recommend is to turn on polar tracking and the oh snap that is enough ok now start drawing a soccer field I will start by drawing the outline very big rectangle let me change the drawing units first so by changing the units type units on the command line press based on the length should change it to decimal let me look at your instruction precision keep it as default and in certain skill generator meters so changing units is always the first thing to do when you start a drawing and click OK when you finish let's start to draw the line work of photo field first I will start from the outline rectangle the length of the rectangle is 1 5 meter and waist is 65 meter we have two kottkatt and I start rectangle by typing in our industry rectangle on the command line click on the first corner we are average really pick one point I'm going inside screen because I know that I mentioned so I type in D for dimension P space bar and the length is 105 place bar width is 65 let's try other corner point so I click on school and then I will draw the halfway line using the line command okay L is our specify the first point I pick the midpoint of the touch line click and the end point of the land is the midpoint of another touch line click and spacebar key and to finish and then I am going to draw the center circle I'm going to check the dimensions of the circle so the diameter here is 18 point three so the radius is eighteen point three divided by two thirty nine point one five going back to AutoCAD so I type in C for Circle C for circle and then I click the midpoint is the center point of the circle and specify the radius as one point one five is five and then I need to click on the center point as my drawing object so this is a point object so i type in p o alikum on line four point spacebar and specify a point pick the midpoint of the halfway line if the point object does not show clearly maybe you want to change the point type you can't have you dd p cy as a point type so d d PT y placemark and you can specify different point type okay I'll keep this one click OK then I'm going to draw the three box let go go box and the penalty box so I will start from the penalty box I will use LAN objects to draw the penalty area start from this point I know the distance between this point and the this midpoint if forty point two divided by two so this direction and now is twenty point one it is convenient to use the template cracking to draw this line so let me going back to AutoCAD and start the line so I'll spacebar I will use template tracking so typing TP place by first clicking point is this midpoint click and then I move my cursor up and touching twenty point one spacebar so this point is the end point of my line so my temper cracking is finished so I press spacebar to formally start the line command and this dimension going back is sixteen point four six sixteen point four six play far and move my cursor down with dimension this voltage want to base bar and for this dimension because AutoCAD has catch the perpendicular point for me so I just need to click and space box finish I'll use the similar strategy to draw the other two boxes so for this box the goal box I will start from this point and I know this direction is eighteen point three / – is 9.15 and I know this is 5.44 this is 18.3 so like going back to AutoCAD start a long gown l spacebar and start TK ten three checking tickets please our first tracking point also the midpoint of the go line move my cursor up the dimension is 1.15 this far and space bargain to start the line command from this endpoint I'm going right catching I forgot the dimensions five point four four point one four four space are going down and this is 18:23 space bar and click on the perpendicular point base bar again to finish the line command now I'm going to draw the smallest box so this dimension is nine point one five divided by two or using our calculator this four point five seven five and then the horizontal Direction is 2.72 vertical 9.15 going back to AutoCAD and start line command l space bar so the first point I will use the Tantra tricky TK click from the midpoint going up this four point five seven five days far space bar appear to Finnish temper clicking and we are going to the left tapping oh my gosh I forgot again 2.7 2 which is a constant to say far go down this time is 1.15 so far and go into the perpendicular point to finish the background bass part okay then I think I finish this Reeboks s now I am going to draw this penalty point and this arc so the penalty mark the measure is marked on the right is 11 from this midpoint so this direction is you can also it is convenient to use temporal tracking because you know the distance from the midpoint and this penalty mark going back to AutoCAD so I start the point 0 5 and the 3 K dot temper tracking place bar trick point is midpoint and going to the right direction capturing the distance 11 space bar so this is a correct point so space bar to finish okay let's draw this arc so dimension here radius is nine point one five it is difficult to draw an arc but it is easy to draw a circle so I can draw a circle this way using this center point and then I can use this line to trim off this side so in this way I will have this circle on the left side okay again the remember the radius is nine point one five go back to AutoCAD so I will start Circle C base bar and then specify the center point click on this node we this is lumped on one five six bar okay then I will use the trim command to trim the right part so TR four trim this bar select objects so the object is going to be my cutting edge so I click on this line space bar select object to trim so I want to trim this side of the circle so I click to print off space box finish okay let's start to draw this corner area so this is an arc with the route is not a point nine one again I will use the circle command to draw a circle and then trim off the outside part go back to AutoCAD and start 3/4 circle center punch should be the corner of the field and this is point nine one base bar and then I use trim TR base bar select objects so the objects should be the cutting edge I select a rectangle they start with fringe selection and then trim of the outside part by clicking it this part is finish the command then I will use the mirror command to mirror this connect to the downside so nearer and I is our select objects should be this corner up click and I will press this bar to finish the selection and specify the point of me align the first point should be this mid point and you can pick another midpoint so whatever maybe this node as the second pinpoint of the newer line click use are not definitely not so I keep know by default and press spacebar to finish the mirroring here I have another caller up okay and then I will go out to draw this coaching at team areas this is a rectangle with the lens 18.3 and width is 3 so my strategy is to draw this rectangle first maybe next to this end point and then move it further from this outline I will start to draw the rectangle first at this corner at this endpoint so remember the dimension 18 points 3 x 3 so contact AutoCAD start we're at Kendall our disease is our first corner I will use despond as the other a corner point because I'm now the dimension so I type in D they are length is 18 point 3 18 23 spacebar something is wrong I will press ESC to exit a comma and started over our c4 rectangle so remember when something throughout just press ESC to exit the command start over again first corner point this big pond and then I will specify the dimensions by cutting in t space back the lens is 18.3 safe are the ways three bays are going to the left side so click on the left click then I will move this rectangle to its right location so the horizontal moving lens is 4.5 and the vertical one is one point five five so go back so move is an se5 selective rectangle click can't this part in the selection first are the base point so arbitrarily pick one point on the rectangle it doesn't matter because the moving distance is the relative distance so move up but this can see this one point five five base part and then move again and spacebar select this rectangle space bar space at this point I will click this corner point I'm going to left the disk can be 5 X 4.5 this bar okay it seems that I have finished all the drawings on the left side so the final step of thorium is to live all the stuff to the right side okay I will start the mirror command and I take our select objects I will select all the objects I'm sorry sometimes my baby's crying so there might be some noises I will finish is nearing command and take care of her okay select objects I have finished the I press spacebar to finish selection and first point of mirror line I pick this end point and second one is this midpoint so click spacebar to finish okay perfect okay since I finish my drawing I'm going to prepare for the submission firstly I will change the name and do it so double-click on the text object zooming a little bit so I have in mind in do it you should put in today's stage when you are doing the assignment so I will leave it blank and when you finish modifying the text press ctrl + Enter and then you need to plot to PDF so when you plot click on application button and choose print click and click on continue to plot establish it newtrich in the printer name to be GG to PDF and then the people side should be and see expand a and horizontal direction what area change it to extremes and check the center the plot finally change the plot skill and check the c2 paper and putting 1 inches to equal to 50 units when you are done and you can preview continue okay it looks nice so I continue to click on the printer to plot okay so name it as your last name nacional simón – and see with somewhere it looks good and don't forget always save your file the DOJ file I will click on Street F and limit X + 3 / assignment – I'm sitting somewhere ok then you can submit both the DWG and PDF file – II can dress the due date is Tuesday so have a great day goodbye

Leave a Reply

Your email address will not be published. Required fields are marked *