Pool Fencing – How to install a pool fence

Pool Fencing – How to install a pool fence



Make it easy with Protector Aluminium DIY Products. With Josh and Jenna Protector Aluminium makes it easy. DIYGot a whole lot easier. You want to see easy we'll show you easy. Protector Aluminium is committed to making your DIY project easy. Let's get started! Welcome to Protector Aluminium HQ. We're here to show you have to build a pool fence. It's easy and safe and also supported by Royal Life Savers so you know it's safe. Now to work our your posts. Today we're using Flange Posts. If you want to fix to timber use timber screws. If you're fixing to concrete use dynabolt. If you're using in ground posts use 600mm deep by 200mm wide and fill it with concrete. Avoid using fast setting concrete. When setting the posts. Mark on the ground where you want them to be. Keep as long to ground as possible. Check by using a spirit level. The standard pool fence panel is 2450mm long but you can make it to your requirements. Always get a longer post for your pool gate latch. Make sure the bottom of your pool fence is no more than 50mm – 80mm from the ground. You can fix the posts with little brackets. The pack has everything you need. Always adjust the torque settings on your drill so you don't damage the screws. If you need more stability in your fence, you can always screw to the bottom of the panel bracket. Cut down the size you need with an angle grinder or hacksaw. I will let my sidekick show you how. Now we're installing the hinges on the gate. We recommend g8safe this hinges include safety cones and allow for easy installation. Now your gate is installed it's time to put in a latch. We've chosen g8safe tri latch. It's easy to install and it's the best on the market with it's dual action trigger. Make the the gate is the right way and swings away from the pool. We've installed our tri latch at 1500mm and adjusted the hinge's tension and installed the safety cone. Don't forget the solar lights! You can buy this profile which is a loop top and flat top directly off the shelf. If you want a variety of colours and profiles. go to the special orders desk at Bunnings and they will help you out. make sure you're aware of sloping ground when building your fence. if in any doubt go see your local council for regulations. It's not just easy it's safe! Download a brochure at protector aluminium.com.au Make it easy with Protector Aluminium Easy DIY Products.

Leave a Reply

Your email address will not be published. Required fields are marked *